Clay & Bailey Overfill Protection

Clay & Bailey Overfill Protection

C & B produce a wide range of Above Ground Storage tank overfill protection system and alarms, a very small selection of which is shown below.

Request more information about this product:

Category:

Description

C & B produce a wide range of Above Ground Storage tank overfill protection system and alarms, a very small selection of which is shown below.

Model A1228-03-3560

Designed for AST’s requiring high GPM flow rate, but only having a 4″ NPT opening, the UL Listed , 3×4 has a 3″ fill and easily installs in a 4″ opening. Flow rate is over 300 gallons per minute at 40 psi. This valve is rated for fuel delivery up to 100 psi and provides positive fuel shut off at high fill rates. Entirely mechanical in operation, it can be used in remote fill applications, retrofitted to an existing AST, and has a unique drain back system designed to allow the delivery hose to be emptied after fuel delivery has been stopped. Materials used in the construction of the #1228 4×6 limiter include:

  • Hard anodized 356-T6 Aluminum
  • Stainless Steel rods
  • Closed Cell Polyurethane float
  • Buna gaskets

The 3″ NPT fill opening allows easy connection to piping or camlock fittings.

Model A1228-03-6060

The 4×6 model is rated for up to 100 psi fuel delivery and has a flow rate of over 300 GPM at 40 psi.

Other options also available

Model A1228-03-2200 OVERFILL PREVENTION VALVE

The solution to problems of restricted height “GenSet” tanks with low storage capacity, the unit installs into a 2″ opening; preventing expensive overfilling of AST’s.

Major design features include:

  • Accepts pressure delivery of product
  • Provides positive shut off of fuel
  • Mechanical in operation: no user interface
  • Minimum 5 PSI operating pressure required
  • Retrofits to an existing AST
  • Compatible with most fuels
  • Provides GenSet tanks with large fuel storage capacity at shutoff height.

Brand

Clay & Bailey Mfg Co