News - Integrated Transfer Solutions Pty Ltd

Agchem Dispensing - Aust Grain Yearbook

Mon, 27 May 2013 00:00:00 -1000

See attached AD

RMC Traler Magazine AD

Fri, 24 May 2013 00:00:00 -1000

RMC Editorial Trailer Magazine

Fri, 24 May 2013 00:00:00 -1000

See Attached article

Sotera Agchem Dispensing Pumps & Flowmeters

Tue, 12 Feb 2013 00:00:00 -1000

Advertised in the Jan-Feb issue of "Australian Grain" is our class-leading Sotera "Chemtraveller" Agchemical dispensing pump. With the highest flow capacity in it's class, the Sotera 12 volt Double Diaphragm pump is the long established leader in the Australian market. With a variety of package options including Micromatic Couplings, the best selling variant includes the unique Sotera Series 850 bulk air-sensing flowmeter. Designed to stop counting when liquid runs out and the meter receives "bulk air", the design assists in preventing under-dosing.

Also highlighted is the re-introduction of the One Liter Volumetric Hand Pump, now back and available after a 3+ year absence.

Emco Wheaton AdBlue Dry-Break Nozzle

Thu, 31 Jan 2013 00:00:00 -1000

Included in the January Issue of the leading Bus Magazine, Australasian Bus & Coach (ABC), was an advertisment for the unique "plastic" Dry Break nozzle system for AdBlue tanks. Utilizing the internationally accepted Emco Wheaton "Posi-Lock" concept, the basis of most bus refuelling in North America, as well as in parts of Asia and Europe, the system allows safe, no-spill and contamination free refuelling of onboard Adble tanks.

RMC Auto Safety Hatch

Tue, 24 Apr 2012 00:00:00 -1000

ITS is very pleased to announce it's appointment as Australian Distributor for the range of RMC Automated, remote safety hatches and re-surfacing tools. Installed on Dry Bulk tankers, the auto-lid system allows workers to fully operate tanker top hatches from the safety of the ground: thereby eliminating what has traditionally been the high risk practice of climbing on top of the tanker whenever loading or unloading access was required.

The RMC hatch is a well proven product which has steadily built to a position of market leadership in North America since it's release there in 2003. Characterised by its ease of installation and unique long life seal design, the hatch has the potential to greatly assist local industry in it's ongoing objectives to eliminate risks and improve loading speed and efficiency.

BREAKING NEWS: The RMC Remote Auto Hatch Lid has now been granted it's Certificate of Conformity to confirm it's compliance with the relevant requirements of Australian Standard AS1210-2010

The addition of the RMC Hatch to ITS range further bolsters its Dry Bulk offerings in combination with the existing Solimar Fluidizer and hatch products.

Emco Wheaton Posi-Lock AdBlue Dispensing System

Sun, 01 Apr 2012 00:00:00 -1000

ITS is pleased to announce the introduction of the new Emco Wheaton Posi-Lock System dedicated to AdBlue dispensing.

Suited primarily to return to base or transit type buses and modelled on the widely used Posi-Lock Bus Refuelling System, the new polymer Nozzle and Adaptor incorporates those same no spill, auto shut-off benefits.

The system features a unique, selective interface which eliminates the risk of cross contamination, which could potentially cause severe damage to a vehicle's fuel system, resulting in the need for expensive repairs as well as causing costly vehicle downtime.

Catering for fill rates up to 38 L/min, the system allows for a pre-set filling lavel and due to it's vacuum shut-off mode of sensing, places no positive pressure on the tank itself.

Available now ex-stock, the new Adblue Posi-Lock nozzle and adaptor combination represents the next step up in contamination-free AdBlue dispensing.

Integrated Transfer Solutions appointed FILL-RITE Distributors

Mon, 04 Jan 2010 00:00:00 -1000

It is with great pleasure we confirm our appointment as Australian distributors for the full range of Fill-Rite DC and AC Pumps, Flowmeters and Hand Pumps.

A brand well established in the Australian market, Fill-Rite has a second to none name and reputation for providing a quality range of products for the efficient pumping and metering of petrol, diesel and compatible aviation products. Additionally it is the only product in it's class which is ANZEx approved.

Stocks will become available during February 2010.

With staff well experienced with the full range of Fill-Rite products and the ability to provide ongoing spares and service, we look forward to being able to supply your Fill-Rite refueling dispenser needs.

TODO appoints new Australian Master Distributor

Mon, 27 Jul 2009 00:00:00 -1000

TODO DRY BREAKS

TODO appoints new Australian Master Distributor

TODO AB has announced that effective immediately, Integrated Transfer
Solutions Pty Ltd (ITS for short) has been appointed as their master
Australian Distributor and stockist.

The TODO-MATIC and TODO-GAS coupling range offers the largest
selection of sizes and material types of DRY BREAKS available globally.
Together with supporting products such as Break-Away Couplings and
Swivels, TODO provides an unequalled range of fluid and gas transfer
solutions to satisfy the most demanding of applications.

With the ever increasing focus on worker safety and elimination of liquid
spills, Dry Breaks represent a much safer solution to many fluid transfer
operations where conventional valves and fittings might presently be used.

This new addition to the ITS range, coupled with our existing and exclusive
EMCO WHEATON DRY BREAK and the MICRO MATIC closed coupling
system distributorships, provides us with a DRY BREAK, dry-disconnect,
closed system portfolio second to none in Australia today.

For further information contact ITS or their network of resellers Australia wide:
Integrated Transfer Solutions Pty Ltd
Unit 21, 111 Lewis Road
Wantirna South, Victoria 3152
Email: sales@its-aust.net